Garage Door Panel Replacement
A hail-dented, cracked or bumper-struck section replaced with a matching one, and the door rebalanced afterward.
A damaged panel can often be replaced without replacing the whole door. A sectional door is built from horizontal sections hinged together, and a dent, crack or bend in one section stops it folding cleanly, strains the hinges and rollers beside it, and lets weather in. Whether one section can be swapped depends on whether the door is a current model, whether the profile and color can be matched, and whether the other sections and the hardware are sound.
We measure the section, identify the door's make and profile, and tell you plainly whether a match is available. When it is, we fit the new section with its hinges and struts, then recheck the spring tension, because a replaced section changes the door's weight and its balance. When no match exists or several sections are damaged, we explain why a new door is the better choice. Panel work is quoted on site.
Damage That Calls for a New Section
- Dents or creases after a hailstorm or a bumper tap
- A crack or split along the top or bottom section
- A section that bows out or will not stay flat
- Gaps between sections where they should meet tight
- A panel with a hole, or a window that is broken
- The door binds because a section is bent
☀️ The North Texas Heat and Hail Factor
Hail drives most of the panel work in North Texas. The National Weather Service says large hail occurs nearly every year somewhere in the Dallas/Fort Worth area, with the severe-weather season peaking in spring, so dented steel and cracked windows are routine finds. Heat adds a second problem: summer sun fades paint on the south and west faces, so a new section can look different beside weathered neighbors. We check the dent depth, the seams and the color match before promising a repair.
What Happens on a Visit
Photograph and measure
The damage, the section height and the door's make and profile are recorded so the right replacement can be ordered.
Match or advise
You are told whether the section can be matched and, if not, what a new door would involve.
Quote on site
The panel, hinges and struts are priced on site, and you decide before an old section comes off.
Fit and rebalance
The new section is fitted, the springs are rechecked for the changed weight, and the door is cycled.